Adding Registered Users to the ARM

SBC registered users can be added to the ARM for the ARM to then be capable of performing call routing based on SBC user registrations. Each SBC has its own registered users. The added SBC registered users and their related information will be viewable in the ARM's Registered Users page shown in Viewing Registered Users in the ARM. To add registered SBC users to the ARM, operators need to first enable the feature as shown below. After the feature is enabled, the SBC registered users and their related information are taken from the SBC and added to the ARM. Later, when defining a Routing Rule, for example, operators can then route calls to SBC registered users (see Adding a New Routing Rule). The destination to which to route the call will depend on where - which SBC - the user performed the registration. In the Routing Rule definition, operators will select the appropriate routing condition, namely, that the call destination is an SBC registered user.

➢

To add SBC registered users to the ARM:

1.

Open the Users page (Settings > Advanced > Users).

Users

2.

Make sure the 'Enable registered users feature' option is selected and then click the Submit button.